Required Tec Diving Equipment

By April 17, 2014Gear

Intro to Tech Diving / Discover Tec Diving

1 Back Plate & Harness (Stainless Steel or Aluminium)
1 Back Inflation Style Wing

1 Set Double Steel Cylinders with Isolation Manifold (100+ cu ft recommended)
2 DIN Regulators (Double Cylinder Configuration)

  • Hose Config:
  • 7 ft. Primary Regulator Hose
  • 22 or 24″ Necklace Regulator Hose
  • 24 or 26″ SPG hose

OR
1 Single Single Steel Cylinder (100+ cu ft recommended)
1 DIN Regulators (Single Cylinder Configuration)

  • Hose Config:
  • 7 ft. Primary Regulator Hose
  • 22 or 24″ Necklace Regulator Hose
  • 24 or 26″ SPG hose

1 Primary Mask
1 Back Up Mask

1 Pair Non Split Fins (Spring Straps Recommended)
1 Drysuit (with 2 Pockets, 1 Per Leg, Recommended)

1 Compass
1 Dive Computer (Depth & Timing Device)
1 Set Wet Notes or Slate

1 Surface Marker Buoy (SMB)
1 Finger Spool or Side Handled Reel (100′ minimum)

1 Cutting Device
1 Primary Light (Canister Style Recommended)
1 Backup Light (2 Recommended)

TDI – Advanced Nitrox & Deco Procedures | PADI – Tec 40, 45, 50

Intro to Tech Required Elements PLUS:

1 Aluminium 40 (AL40) or 80 (AL80) deco bottle (O2 Clean)
1 DIN Deco O2 Clean Regulator with 40″ reg hose and 6″ spg hose

1 Canister Light
2 Backup Lights

1 Additional Depth & Timing Device (e.g. Dive Computer)
1 Additional Cutting Device (1 Accessible from Both Hands)
1 Side Handle Reel (200′ minimum)

Trimix Courses

Tech Required Materials PLUS:

1 Aluminium 40 (AL40) or 80 (AL80) deco bottle (O2 Clean)
1 DIN Deco O2 Clean Regulator with 40″ reg hose and 6″ spg hose
1 Lift Bag (80lbs minimum lift, Closed Circuit Recommended)
1 Side Handle Reel (400′ minimum)
1 Drysuit Inflation System (Argon Bottle + Reg)